This failure is commonly caused by following reasons:
The last but the least note: Since the firmware format uploaded by the website is in .zip
, the suffix will be as same as the that in ASR firmware. In order to distinguish firmwares and compressed packages, the ASR firmware suffix is changed to .bin
format. Pay special attention when downloading the ASR firmware.
Of course. After the actual project development is completed, the project script can be directly merged into the firmware, and then the mass production tool can be used to burn the firmware one by one. For specific operations, please refer to the chapter ‘QuecPython Official Website-Document Center-Advanced Development-Mass Production’
for details.
Yes. However, the QPYcom tools and mass production tools cannot be selected, and full-chip burning is simple and easy to operate. Unless special demand, it is not recommended to burn part of partition.
QuecPython has a number writing tool that can write parameters to the module through the interactive port after burning the Python firmware into the module and save it as a configuration file.
The SN writer in QuecPython can writer the parameters into module and save as configuration file via serial port after burning Python firmware.
The file format usually saved is in .json
. This solution can also be used in actual operations.
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。