【环境信息】
环境信息:arm物理机
OS版本:20.03-LTS-SP2
内核:4.19.90-2105.2.0.0086.oe1.aarch64
【问题复现步骤】
1.安装server模式
2.安装成功进入系统查看message日志
【预期结果】
无异常报错
【实际结果】
有异常报错:usbhid 1-1.1:1.1: can't add hid device: -110
usbhid: probe of 1-1.1:1.1 failed with error -110
Hey ga_beng_cui, Welcome to openEuler Community.
All of the projects in openEuler Community are maintained by @openeuler-ci-bot.
That means the developers can comment below every pull request or issue to trigger Bot Commands.
Please follow instructions at https://gitee.com/openeuler/community/blob/master/en/sig-infrastructure/command.md to find the details.
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
其他 USB 设备都是 OK 的。
usbhid 是键盘等交互式设备。
建议排查 USB 接口是不是正常,是否未插牢
#I3B4PB:【21.03】物理机偶现出现内核报错 usbhid: probe of 1-1.1:1.1 failed with error -110 之前 21.03 上的 issue,跟树莓派相关。
已确认问题当前issue和树莓派无关联。
请检查板子 USB 接口
没有插u盘的机器上也会偶现这个错误
某台环境上启动基本必现
openEuler-20.03-LTS-SP2
[ 5.640586] hub 1-1:1.0: USB hub found
[ 5.641186] hub 1-1:1.0: 4 ports detected
[ 5.935580] usb 1-1.1: new full-speed USB device number 3 using ehci-pc
[ 21.363580] usb 1-1.1: device descriptor read/64, error -110
[ 36.979579] usb 1-1.1: device descriptor read/64, error -110
[ 37.171579] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[ 52.595578] usb 1-1.1: device descriptor read/64, error -110
[ 68.211581] usb 1-1.1: device descriptor read/64, error -110
[ 68.927575] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 79.603578] usb 1-1.1: device not accepting address 5, error -110
[ 79.691574] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 90.355579] usb 1-1.1: device not accepting address 6, error -110
社区 stable 版本一样可复现
主线内核一样有问题
登录 后才可以发表评论