您好,我采用最新的openEuler-1.0测试perf spe-c2c的功能,但是发现/sys/devices下没有arm_spe_0这个目录
执行perf spe-c2c record时显示:
event syntax error: 'arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/'
___ Cannot find PMU `arm_spe_0'. Missing kernel support?
想问下您这是为什么? 需要哪里开启spe功能吗?
Hey @haoxing990, Welcome to openEuler Community.
All of the projects in openEuler Community are maintained by @openeuler-ci-bot.
That means the developpers can comment below every pull request or issue to trigger Bot Commands.
Please follow instructions at https://gitee.com/openeuler/community/blob/master/en/sig-infrastructure/command.md to find the details.
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。
这应该是内核的bug,请麻烦尽快解决
确认下,这个配了没,还有 BIOS 版本是否更新
1、内核启动参数:kpti=off
2、BIOS支持:PPTT 2.0 & MADT, 上报spe信息
确认下,这个配了没,还有 BIOS 版本是否更新
1、内核启动参数:kpti=off
2、BIOS支持:PPTT 2.0 & MADT, 上报spe信息
@Xie XiuQi 谢谢您的回复,麻烦能告知下对应的BIOS版本吗??
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Table at 0x2FC60000.
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: Huawei Corp.
Version: 0.88
Release Date: 07/24/2019
Address: 0x5F000
Runtime Size: 644 kB
ROM Size: 6144 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
需要 BIOS 版本支持:
1、内核启动参数:kpti=off
2、BIOS支持:PPTT 2.0 & MADT, 上报spe信息
登录 后才可以发表评论